Virpil Faceplates - Fully Custom
These faceplates feature a high-resolution etching, personalized 100% by you for your Virpil Control Panel setup. Every aspect of these plates is customized to suit you and your sim pit. Any labels, and features such as arrows, icons, dividers, etc. are all customizable. Get the most from your panels and ditch those generic labels. Whether you’re a combat simmer and need to know what to push in the heat of the moment or you’re into the airline or space sim scene and need to remember all the functions you mapped out for your air or space craft these plates have you covered. These plates are easily swappable so you can cover a vast range of aircraft or game layouts.
No finger guards are compatible with these plates.
A toggle nut removal tool can be found here.
Use any preferred editing software to create a guide for me to use during the design phase. Send me the template(s) you edited with your order number as the subject to: orders@deathdonkyprints.com
CLICK HERE FOR TEMPLATES.
Please note once I have finished your plate design, the “final” design will be sent back to you for approval before printing. That will be the final moment to make any adjustments before things are permanent.
Virpil Control Panel 1:
This panel faceplate is for the Virpil CP1 control panel ONLY. This plate is not compatible with any other CP1 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Virpil Control Panel 2:
This panel faceplate is for the Virpil CP2 control panel ONLY. This plate is not compatible with any other CP2 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Throttle Panel:
This panel faceplate fits on the stock CM3 series Virpil Throttle panels ONLY. This plate is not compatible with any other throttle plates. Only 3 face plate screws need to be unfastened for installation. Top right, bottom right, and middle left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
SharKa-50 Panel:
This panel face plate is for the Virpil SharKa-50 control panel ONLY. This plate is not compatible with any other SharKa-50 Face Plates. Only 4 screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
These faceplates feature a high-resolution etching, personalized 100% by you for your Virpil Control Panel setup. Every aspect of these plates is customized to suit you and your sim pit. Any labels, and features such as arrows, icons, dividers, etc. are all customizable. Get the most from your panels and ditch those generic labels. Whether you’re a combat simmer and need to know what to push in the heat of the moment or you’re into the airline or space sim scene and need to remember all the functions you mapped out for your air or space craft these plates have you covered. These plates are easily swappable so you can cover a vast range of aircraft or game layouts.
No finger guards are compatible with these plates.
A toggle nut removal tool can be found here.
Use any preferred editing software to create a guide for me to use during the design phase. Send me the template(s) you edited with your order number as the subject to: orders@deathdonkyprints.com
CLICK HERE FOR TEMPLATES.
Please note once I have finished your plate design, the “final” design will be sent back to you for approval before printing. That will be the final moment to make any adjustments before things are permanent.
Virpil Control Panel 1:
This panel faceplate is for the Virpil CP1 control panel ONLY. This plate is not compatible with any other CP1 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Virpil Control Panel 2:
This panel faceplate is for the Virpil CP2 control panel ONLY. This plate is not compatible with any other CP2 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Throttle Panel:
This panel faceplate fits on the stock CM3 series Virpil Throttle panels ONLY. This plate is not compatible with any other throttle plates. Only 3 face plate screws need to be unfastened for installation. Top right, bottom right, and middle left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
SharKa-50 Panel:
This panel face plate is for the Virpil SharKa-50 control panel ONLY. This plate is not compatible with any other SharKa-50 Face Plates. Only 4 screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
These faceplates feature a high-resolution etching, personalized 100% by you for your Virpil Control Panel setup. Every aspect of these plates is customized to suit you and your sim pit. Any labels, and features such as arrows, icons, dividers, etc. are all customizable. Get the most from your panels and ditch those generic labels. Whether you’re a combat simmer and need to know what to push in the heat of the moment or you’re into the airline or space sim scene and need to remember all the functions you mapped out for your air or space craft these plates have you covered. These plates are easily swappable so you can cover a vast range of aircraft or game layouts.
No finger guards are compatible with these plates.
A toggle nut removal tool can be found here.
Use any preferred editing software to create a guide for me to use during the design phase. Send me the template(s) you edited with your order number as the subject to: orders@deathdonkyprints.com
CLICK HERE FOR TEMPLATES.
Please note once I have finished your plate design, the “final” design will be sent back to you for approval before printing. That will be the final moment to make any adjustments before things are permanent.
Virpil Control Panel 1:
This panel faceplate is for the Virpil CP1 control panel ONLY. This plate is not compatible with any other CP1 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Virpil Control Panel 2:
This panel faceplate is for the Virpil CP2 control panel ONLY. This plate is not compatible with any other CP2 Face Plates. Only 4 face plate screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
Throttle Panel:
This panel faceplate fits on the stock CM3 series Virpil Throttle panels ONLY. This plate is not compatible with any other throttle plates. Only 3 face plate screws need to be unfastened for installation. Top right, bottom right, and middle left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
SharKa-50 Panel:
This panel face plate is for the Virpil SharKa-50 control panel ONLY. This plate is not compatible with any other SharKa-50 Face Plates. Only 4 screws need to be unfastened for installation. Top right, bottom right, top left, and bottom left screws only. Some toggle covers may need to be removed for plate installation.
The template download can be found HERE.
